Depot containers

Steel containers for clever waste disposal and recycling collection

Whether glass, paper, leather, vinyl or plastic, residual waste or electrical scrap: our depot containers made of galvanized steel panels can simultaneously collect up to three different materials in one container. Self-closing flap on the openings protect against fire emergence and water ingress.

Benefit from the highly economical solutions and rapid and easy emptying with efficient single-person operation, using the proven SSI SCHAEFER system.

Single-chamber and multi-chamber system

Our single-chamber system collects one type of waste in the depot container. This is highly recommended at locations involving large quantities of a single type of waste. In contrast, the multi-chamber system cleanly separates the waste types. Partitions divide the container into two or three chambers. In addition, the modular base system also enables partitions to be retrofitted at any time.

Rapid, simple, safe, and cost-effective

Benefit from a 66 % performance improvement when using depot container systems from SSI SCHAEFER in comparison to other depot containers! For you this means that SSI SCHAEFER depot containers can be emptied 20 times within one hour in comparison to 12 times for standard depot containers.

Our sound insulation also exceeds the standards. The noise emissions when glass bottles are thrown in is below the Class 1 noise limit defined by the German Federal Environmental Agency. That is why our system is rated as “low noise”. We achieve this by fitting the containers with an elastic flap cover made of rubber, foam coatings on all side walls and floor, a sound absorption method in the roof section along with a plastic-covered fall arrester.

In addition, SSI SCHAEFER’s proven Grumbach system guarantees additional noise reduction on removal trucks during the interviewing process. The optimum insertion depth of the container ensures that it is emptied quietly and near to the ground.

DEPOT CONTAINERS MADE OF GALVANIZED STEEL PANELS FOR THE CENTRAL COLLECTION OF GLASS, PAPER, ETC.

  • Rapid and easy emptying with efficient single-person operation

  • Container sizes: 1.6 m3, 3.2 m3, and 5.0 m3

  • Robust and durable: “Quality “made in Germany”, made of emerging galvanized steel panels, with optional additional paint finish

  • Modular base system enables quick retrofitting at any time: Depot containers can be divided into two or three chambers using partitions, enabling one container to simultaneously collect up to three types of waste

  • Greater efficiency: SSI SCHAEFER depot containers can be emptied 20 times within one hour in comparison to 12 times for standard depot containers

  • Corner reflectors and stickers for labeling the materials

  • Self-closing flap on the openings protect against fire emergence and water ingress

  • Additional sound dampening through the optimum insertion depth when emptying the container

  • Special designs for bulky and large-volume packaging waste

  • Optional extras: Partitions for 2 and 3 chamber systems, sound insulation, special flat for textiles, large opening for LVP/residual waste, paint finishes

  • Other openings or partitions can be easily fitted with little work

  • Optional: Depot container 3.2 m3 – non-assembled/boltable: Reduces the transport volume by 70%, rapid and easy on-site assembly, damaged parts can be replaced individually, special designs are compatible with existing depot container systems

DOWNLOADS

Brochure Depotcontainer EN

Brochure Depotcontainer EN

5.2 MB

DO YOU HAVE QUESTIONS OR REMARKS?

[---Error_NoJavascript---]