SSI LOGIMAT® storage lift

The SSI LOGIMAT® storage lift is your storage and picking solution in one!

SSI SCHAEFER’s SSI LOGIMAT® vertical storage lifts provide you with a storage and picking solution in one system. The state-of-the-art storage lift utilizes the goods-to-person principle and sets standards in performance and ergonomic operating comfort.

The storage lift can be compared with an over-sized drawer cabinet with front and rear rows of trays containing product. A lift is located between the two rows, pulls out the trays, and transports individually them to the correct position of the operating opening, allowing the operator to perform the picking operation with the highest level of accuracy.

Diverse designs for diverse requirements

The SSI LOGIMAT® can be optimally adapted to all site conditions with eight different model widths and two model depths along with a freely selectable machine height of up to 24 meters. The compact design makes maximum use of the available height on site. Features such as tray storage with a 25 mm spacing, the FIX height storage strategy, and/or intelligent height optimization (IHO), or trays, flexibly designed for space and weight optimization, enable high-density storage with the smallest surface area.

The system adapts to all your site conditions, whether separate supply and removal sides, two-sided supply or removal one level higher, whether the system is located in the basement, as a ceiling breakthrough, or recessed into the floor. The SSI LOGIMAT® storage lift can be fitted on the external facade of a warehouse, if necessary. This construction serves to reduce the construction costs for expanding the warehouse to a minimum.

      Benefits:

  • Lean warehouse processes (picking and replenishment)

  • Eliminates unnecessary work steps

  • Easy integration into existing procedures

  • Minimal errors

  • Scalability

  • Intuitive touchscreen user interface

SSI LOGIMAT®

The SSI LOGIMAT® Vertical Lift Module is a well-rounded and dynamic complete solution

 

CLEVER STORAGE AND PICKING

Vertical Lift Module LogiMat®

The SSI LOGIMAT®​​​​​​​ can be utilized as an autonomous system or integrated into an automated application. It is equipped with a PLC as a standard feature. A variety of control and software options are available for your individual configuration. These are based on the WAMAS® software from SSI SCHAEFER which is in use worldwide.

From the connection to a higher level ERP system to article management and order processing: Every project is based around a clear and reliable standard solution that can be flexibly tailored to your logistics processes through simple expansions. The storage lift is operated via a touchscreen with an intuitive user interface.

LMB container series with divisions

Exclusive storage lift functions provide compact, durable, safe, and ergonomic solutions 

The storage lift is equipped with numerous standardized functions. These eliminate the need for expensive expansions for additional options. The consistently modular design makes the SSI LOGIMAT® storage lift a scalable solution and a highly reliable investment. As SSI SCHAEFER always utilizes high quality components such as the robust rack and pinion drive, the system is also distinguished by its minimal wear and low-maintenance requirements.

SSI SCHAEFER offers a broad range of options, including various exclusive solutions, to customize and expand the SSI LOGIMAT®.

  • The LogiTilt tilting system for ergonomic removal of the goods and gripping depth reduction.

  • LogiWork enables the height of the delivery table to be adjusted to the employee’s height.

  • The LMB container series as partitioning accessories for a trade depth of 800 mm guarantees maximum use of the storage space

Vertical Lift Module LogiMat®
  • Up to 90% less storage space required in comparison to static storage solutions

  • Reduces travel times by more than 70%

  • Automated processes and ergonomic design increase performance by more than 20%

  • One-stop solution: from hardware to software to a sophisticated after-sales concept

FREQUENTLY ASKED QUESTIONS ON VERTICAL LIFT MODULES

Find answers on all issues related to our Vertical Lift Modules

A Vertical Lift Module is an advanced concept/design that came from the Vertical Carousel. 

  • The carousel system uses a chain system that move carriers along the chain in a vertical motion. Since it is the first storage and retrieval system developed, user will need to consider an overloading situation since everything hangs from a chain (so you always have to consider what is on the other side). Think of it as a ferris wheel, in which the gondolas have to be of a same height, weight in order to maintain a balance, you sometimes have to let several empty gondolas pass before one climbs in.

  • A Vertical Lift Module (VLM), on the other hand, doesn’t carry such burdens. In a warehouse environment, you need to be flexible in the process of retrieving and storage of articles. You can futureproof the storage space by increasing the height of the VLM or by reducing the height of the goods.
     

Warehouse space is one of the most important factors in every warehouse. Since the Vertical Lift Modules are built upwards and not horizontally, they increase the storage density in the warehouse area over a few square meters, and at the same time they enable easier access to goods.

As the articles stored in the SSI Logimat are not visible, the user needs to access the parts using a password. It is also possible to select a user and assign him/her the appropriate authorization and even limit the trays that he/she can operate.

Each retrieval is booked directly at the storage lift and can be imported directly into the ERP (Enterprise Resource Planning) system. The order picking list is visible on the SSI Logimat display and can be processed immediately. Therefore, the inventory is always up to date and no more paper is needed.

Minimum once a year maintenance is recommended for single shift and twice a year for double shift. Troubleshooting can be done remotely. 90% of the machine parts can be detected and rectified remotely.

An Automated picking involves picking goods / products that are carried out automatically by machines that are controlled using the PLC software and then picked up by the operator.
This process is also known as the "goods to man" principle. While manual picking or also known as “man to goods” is the process of picking the goods / products in which the operator searches for the location and retrieve the goods / products physically. Imagine automated picking like ordering food from ala-carte menu and your order is served on the table while manual picking is akin to choose your food from a buffet feast.

Vertical Lift modules are suitable for small and medium size goods, such as health and beauty products, spare parts, electronic parts, luxury goods, raw material and other goods or supplies in Production

Yes! SSI Logimat has more than 15 additional options you can add onto the standard machine. For more details you can contact us.

The maximum Tray load Capacity is up to 700kg. 

Yes, the integration of Vertical Lift Modules into an existing ERP environment (for example SAP) is a worthwhile goal in order to ensure complete integration into the intelligent material flow of a manufacturing company. But it is not mandatory. For simply storing and managing items, the machine does not have to be integrated into a higher-level ERP system, but can be implemented directly out-of-the-box.

Yes, the Vertical Lift Module is expandable, the controller can control multiple machines. For more details please email us at: info.ph@ssi-schaefer.com

Cooperation C+C Krug and SSI SCHAEFER english

Case Study C+C Krug

Learn more about C+C Krug's path to automation with SSI LOGIMAT® and WEASEL®.
READ MORE

CLEVER STORAGE FOR SMALL PARTS

The LMB storage lift container series has been specially designed for use with storage lifts. It is optimized for a tray depth of 800 mm and can also be divided up with additional partitions. This enables rapid and easy adaptation to your stored articles.

READ MORE
LMB containers on a tray for vertical lift module LogiMat®

DOWNLOADS

SSI LOGIMAT® Vertical Lift Module

The Dynamic Solution for the Storage and Picking of Small Parts.

801.9 KB

Brochure SSI LOGIMAT® Vertical Lift Module Options

All vertical lift module options are available individually.
This allows you to flexibly configure your SSI LOGIMAT® according
to your requirements and wishes.

430.7 KB

DO YOU HAVE QUESTIONS OR REMARKS?